Three Channel IR Remote Control based on PIC Microchip

This project is a 3-channel IR remote control for relays. It uses RC5 IR protocols.
Features :

* CPU PIC12F629 at 4MHz crystal for Tx/Rx
* 3 channel output relay
* The Tx use sleep mode for saving battery power
* Use Phillips RC5 protocal
* distance more than 7 m.
* Easy circuit to build and assembly

 Source: http://www.sixca.com/eng/articles/remote/index.html

On both the sides (Tx and Rx), it uses PIC12F629 microchips. For firmware and receiver part, visit here.